Điện thoại : +8618150976625
E-mail : Hello@MicrofiberLeather.com
Die-cut suede sheet for jewellery box tray inserts: 0.4-0.6 mm, 1370 mm wide, nonwoven back, five colours. Send tray dimensions and layout for a sample. We supply sheet, not finished inserts.
Vật liệu :
Microfiber Suede (Synthetic Suede), crackle-embossedThành phần :
55% Nylon + 45% Polyurethane (PU)độ dày :
0.4 / 0.5 / 0.6 mmChiều rộng :
1370 mm (54 inch)Màu sắc :
5 stock shades (black, champagne, navy, rose pink, mint); custom colours availablethời gian dẫn :
Confirm against order and specificationKhả năng sản xuất :
About 1,000,000 metres per month (multi-product line)Ask any box maker what ruins a tray insert and the answer is rarely the fabric — it is a compartment drawn two millimetres too narrow, or a pile that will not lay flat on the board. This page is about the material side of that: the sheet we supply, how it behaves at the die and on the backing board, and the details worth fixing before a layout goes to cutting.
We supply crackle-embossed synthetic suede sheet for die-cut tray inserts: 0.4 / 0.5 / 0.6 mm, 1370 mm wide, nonwoven back, five colours. Send the tray dimensions and the jewellery it holds; we return the grade and a swatch. We supply sheet material, not the finished insert.
|
Parameter
|
Our standard
|
Your input
|
|
Caliper (gauge)
|
0.4 / 0.5 / 0.6 mm
|
pillow height, slot depth
|
|
Web width
|
1370 mm (54 inch)
|
nesting and cutting layout
|
|
Fibre / binder
|
55% PA / 45% polyurethane
|
sensitive-metal requirement
|
|
Top surface
|
Pebble-grained matte finish
|
grain by plate
|
|
Reverse
|
Textile backing
|
board, MDF or foam substrate
|
|
MOQ
|
300 m per shade
|
sample before bulk
|
We do not sell a fixed set of trays. The die follows your floor plan: a flat liner for the base, slots and cushions where rings or earrings sit, a wider wrap for a drawer. What we control is the sheet — its thickness, its grain direction and how cleanly it cuts — so the converter can hold a tight radius without the face lifting.
A sharp die leaves a clean edge because the coating is bonded to a woven backing rather than a loose pile. Ask for one sample cut before committing the whole layout: the sheet behaves consistently, but only your tray can say whether a slot is deep enough.
The nonwoven back takes glue and lays flat onto MDF, cardboard or EVA foam. It accepts a folded, rounded edge for a tray wall, so the liner can turn up at the sides without the face cracking. The same sheet covers display risers and pads for a retail tray, letting the case and the insert read as one set.
WINIW runs its own plants and warehouse in Jinjiang, so the sheet is cut, finished and packed under one roof. Material-level REACH SVHC screening is available on request. Send the tray size and the layout and we will reply with the grade and a physical swatch, freight collect.
Send the inside measurements of your tray, or a sample tray, together with the pieces it must hold. Our customers draw the grid and slot spacing from that; we supply the sheet in the grade, shade and thickness you approve.
Box makers use flocked fabric, suede, linen, PU film and microfibre for the face, over board, MDF or foam. The grade here is a crackle-embossed coated microfibre on a textile back, chosen when a low-sheen, wipeable face is wanted. It is sold as sheet, not as a ready insert.
The 300-metre floor is per shade, since dye lots are run one colour at a time. A two- or three-colour case set is therefore priced per colour; ask us to quote the shades together so the batch timings line up.
Yes — a swatch goes out against the shade and grain you name. Check it against your tray and lighting before the order is placed; that step is what prevents a rejected batch later.
We are the mill, not a box assembler. You receive continuous sheet or cut-to-size pieces in the grade you approve, and your converter handles the die and the board. This keeps one material standard across every shade in your range.
Share the tray drawing, the pieces and the shade you have in mind. A grade recommendation and a swatch come back by freight-collect courier.
Request Insert SampleTHẺ NÓNG :
Vẻ ngoài sang trọng Faux Suede cho quầy trưng bày trang sức
Jewelry Box Inserts: Soft Microfiber Suede Linings That Fit
Business Phone : +8618150976625
E-mail : Hello@MicrofiberLeather.com
Mobile & WhatsApp : +8618150976625
Địa chỉ nhà : W6-302 Shimao Manhadun Shuanglong Road, Jinjiang Quanzhou Fujian China
© Bản quyền 2022 Winiw International Co., Ltd.Đã đăng ký Bản quyền.
XML | Chính sách bảo mật |
